Two-Bit Air Cleaners - Named Air Cleaner of the Year! - Page 2

dwembacpa · #16 (**permalink**) 02-07-2006, 01:59 PM

Viewed these pieces in Cincy and talked with Justin briefly. Cool product and the quality is there too. Keep up the good work Justin.

mutantbuell · #17 (**permalink**) 02-07-2006, 02:15 PM

Thanks for the compliment, much appreciated. I think it was a good show for us, and pretty much everyone that stopped seemed to like the part, so we'll see how many it helps us move in the next couple of weeks.

Thanks again,
Justin @ Two-Bit Choppers

mutantbuell · #18 (**permalink**) 03-04-2006, 08:27 PM

Hey Guys,
Thought I would post up a pic of one of our Widow air cleaners on CC member Don Rice's CFL. Thought it looked great with the Hell Bents! Thanks again Don, we truly appreciate your business.

Later,
Justin @ Two-Bit Choppers

mutantbuell · #19 (**permalink**) 03-04-2006, 08:44 PM

And while it might not seem that exciting I guess I was pretty stoked to get our first batch of custom packaging in this week courtesy of Foam Factory in Clinton, Township, Michigan. Now even the UPS man is going to have to really try and screw them up!

Later,
Justin @ Two-Bit Choppers

Damraider · #20 (**permalink**) 03-04-2006, 09:00 PM

Justin,how much do they charge you for the packaging? That looks bulletproof!! BTW nice job on those,I love the deep chrome look!

Damraider

mutantbuell · #21 (**permalink**) 03-04-2006, 09:15 PM

Hey Steve,

I ordered a quanity of 100 just to get going with them, and with the one time set up and shipping to get them here it was right around $670, so with the $.98 a box, we're at just under $8 per air cleaner in packaging. It is pretty bulletproof too, with an inch of medium density foam below the piece and the inch thick "lid" piece you see off to the side there, I'm pretty sure we could drop one of these babies off the roof of the shop and have it be just fine. I think it looks good too, nice presentation, because I take a lot of pride in these air cleaners especially and I wanted packaging that reflected the quality and time we put into the piece itself.

Thanks for the compliment too!

Later,
Justin @ Two-Bit Choppers

Shawn1340 · #22 (**permalink**) 03-04-2006, 09:41 PM

Do you think you will be putting out a traditional skull air cleaner soon?

I am just curious.

mutantbuell · #23 (**permalink**) 03-04-2006, 09:45 PM

Hey Shawn,

Drop me a PM with your email address, as I've got a couple of designs programmed that you might like. I can send you over pictures of the simulated 3-D rendering of the piece rather than cutting any more prototypes until we've hit a revision you dig.

Talk soon,
Justin @ Two-Bit Choppers

Shawn1340 · #24 (**permalink**) 03-04-2006, 10:06 PM

If you start taking on custom designs let me know! I have an idea for another cool one, but I wouldn't want to see it on a 100 other bikes.

Just being a P.I.A.!

shooter64 · #25 (**permalink**) 03-05-2006, 05:52 PM

Justin, I am ready to start mine, I will send you some artwork.....

mutantbuell · #26 (**permalink**) 03-05-2006, 09:10 PM

I knew the fancy boxes would get you Bart!

I'm definitely looking forward to it buddy. Just send what you've got to justin@twobitchoppers.com and I'll take a look and we can go from there. I should be sending more plates to chrome later this week, so maybe if we work around fast enough I can get it in with this batch as Chromemasters is running 3-4 weeks with stuff right now, so I would like to get yours in the pipeline at least!

I'll look for your message, and thanks again for your interest!

Justin @ Two-Bit Choppers

mutantbuell · #27 (**permalink**) 05-24-2006, 12:35 PM

A couple of pics of some custom air cleaners I did for a shop up in Washington state. Obviously just our standard Spade design with a little extra engraving to add the shop's name. The black anodized version was the first anodized one I had done, but it turned out great, so we will be offering this as an option on any of our designs. I also got another picture in from a customer up in Canada of a Mudflap Girl installed on his new Fatbot, gives you pretty good scale against a Twin Cam engine. Let me know what you guys think.

Later,
Justin @ Two-Bit Choppers

Markee · #28 (**permalink**) 05-24-2006, 01:22 PM

You're just winning all types of stuff this year! Good job man and nice cleaners.

mutantbuell · #29 (**permalink**) 05-24-2006, 10:48 PM

Thanks Markee, much appreciated!!

Justin @ Two-Bit Choppers

mutantbuell · #30 (**permalink**) 06-28-2006, 07:56 AM

A couple of new custom cleaners I just got back from the chromer.

This one is of course for Club Chopper Member Shooter64 (aka Bart from Cat Eye Customs). Took their modified Biohazard design and milled it up.

This was a custom I did for a customer back east who has a Native American theme going on his bike and wanted a cleaner that tied in with that. Let me know what you guys think.

Later,
Justin @ Two-Bit Choppers