texas chopper stock forward control mounts need help

[purpleride]

my G/F bought her a 2005 texas chopper and the problem is the previous owner extended the forward controls 2". He said he had the original mounts for her but cant seem to find them. Is there anyone out there who may have a set of stock chrome mounts for her so she can get to riding she is really frustrated to have a bike just sittin there not being able to ride it. I can reach them fine but she doesnt want to ride bitch on her own bike. I cant see a problem with that lol.
I hope someone can help me out.

[Boogeyman]

I may be mistaken, but the extensions should be mounted to the factory mounts that are welded to the frame. Just take the extensions off and mount the controls to the mounts that are on the frame. Got a pic?

[Skydiver]

I may be mistaken, but the extensions should be mounted to the factory mounts that are welded to the frame. Just take the extensions off and mount the controls to the mounts that are on the frame. Got a pic?

Thats the way they are on my 03 Texas Chopper. I just installed the 2" extensions about a year ago, if the 05 is the same its just an extension plate that goes between the frame and the forward controls. You will need a shorter shift rod though.

[purpleride]

On a 05 they mount to front engine mount like a bigdog not to the frame its self I have adapters on my bike to move mine3" and this setup is totally diff.
?

[purpleride]

surely someone has a stock set they want to sell

[1badhorse]

i have a set of outside chrome mounts used on a daytec frame on a 2007 lsc.......they have a couple nics and scratches...they are the outside piece of the 5 piece front motor mount once mounted you will never see the nics ...........lets bargain here ........i am building a 07 lsc and im in need of the 0" offset closed primary for a right side drive ....or im open to a open primary for a right side drive.........im done with the build now i need the motor, transmission, and primary........then i too can be riding.......help me locate what i need and you can have these for free...

[1badhorse]

since you are from kansas.............wouldnt BIGDOG been a choice of the home team.....lmao.................sorry im originally from kansas.......

[1badhorse]

hit me up I might have what you need.....i have the out side pieces of the 5 piece set....one side has a nic and a light surface scratch if i remember right ....bigdcorb1972@aol.com

[jackandstacey]

Probably found what you're looking for by now. What did you end up doing with the forwards? I've been trying to find a set for my 04 TX.

jack6278@gmail.com

[purpleride]

lol well a guy told me he could make the pieces out of stainless if i made the pattern so i did he said would be round 40 bux well picked them up and it was over 400 bout shit but they look good and work