Master Cylinder rebuild kit Accutronix

[CIC2016]

All,

I need to rebuild the rear master cylinder for an Accutronix forward control set. I've never had this brand before, and would have never sprung for them except I got them new old stock from a guy that quit a build.

They sat for a while, and must have gotten some debris in the rear master cylinder. I bled them and they worked initially, but will not build pressure and coughs up air each stroke.

Is there an aftermarket kit that will work in these? Accutronix wants $50 plus shipping for the kit I need. WTF?! I'm sure there is another kit that may work in this, unless the piston, seals and jets in the master cylinder are different than any other one on the planet. I don't know and very well could be. They are asking over $1000 for the controls after all...

The kit I need is MC630A. https://www.accutronix.com/faq11mast...nderrebuildkit

Thanks for any guidance

[Spade115]

So your looking for a knockoff kit for it?

50 isnt bad....how much is the shipping?

I found it on summit for 43 and change if that helps..

[CIC2016]

I did see that one. Thank you!

[Spade115]

no problem, i was just slightly confused lol. check ebay, you can find parts cheaper, got a new ignition coil for 20 bucks