Club Chopper Forums

Club Chopper Forums (http://www.clubchopper.com/forums/)
-   Iron Horse Chopper Builds (http://www.clubchopper.com/forums/iron-horse-chopper-builds/)
-   -   Ironhorse slammer 2005 rsd 280 open belt (http://www.clubchopper.com/forums/iron-horse-chopper-builds/123268-ironhorse-slammer-2005-rsd-280-open-belt.html)

ZIKY 12-04-2021 05:21 AM

Ironhorse slammer 2005 rsd 280 open belt
 
Hello
i want to change the primery std to open belt 3" bdl or ... - with bearing suport...
But i dont now which on will fit to my byc .there is offset whell /or if i need any special tool -adapters
i dont live in usa so i need to order all the parts that i need in the first shipping
ANY HELP
thank you
ziky

STEINBVG 12-07-2021 09:19 AM

Quote:

Originally Posted by ZIKY (Post 1288644)
Hello
i want to change the primery std to open belt 3" bdl or ... - with bearing suport...
But i dont now which on will fit to my byc .there is offset whell /or if i need any special tool -adapters
i dont live in usa so i need to order all the parts that i need in the first shipping
ANY HELP
thank you
ziky

There typically no offset for RSD: the relationship between the engine and trans is stock.[ although they may or may not be centered in the frame- never mind that]

Any commercial open belt drive with no offset should be bolt on replacement as far as I know.
All the interrelationship amongst the belt drive parts are already built in the kit, once you specify how much offset you need- in you case-'zero'.

Typically for an 'offset' they offer 3 things- the engine to primary spacer, offset trans bracket, and the a front pulley offset collar depending how much offset is necessary- but that all for big tire LSD setups.

HERE IS PRIMO/BRUTE IV PRIMARY, A SWITCH FROM HUGE LSD OFFSET[2+"] TO ZERO OFFSET WITH RSD[ TRANS ,MOVED BACK 'HOME', THE FRON PULLEY STILL HAS 2+" COLLAR /EXTENTION
http://www.clubchopper.com/forums/pi...ictureid=10321 http://www.clubchopper.com/forums/pi...ictureid=10322 http://www.clubchopper.com/forums/pi...ictureid=13938

STEINBVG 12-07-2021 09:31 AM

Also, depending on you closed primary, if it has 2 piece bearing on the main /trans shaft side- the race with remain on the shaft press fit and may need to be removed with a puller of sorts. Auto shops have those.
If it's newer enclosed 1 piece bearing- it will come out with the primary

JamesS 12-13-2021 08:15 AM

You'd be better off contacting the primary drive suppliers.
Have pics of your bike and all the info and they can advise and supply,


All times are GMT -7. The time now is 11:22 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubchopper.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners or moderators. clubchopper.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you or have been given the expressed written consent to post. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). For full policy, please click the "CC policy" link. Thank you for visiting the clubchopper.com