Club Chopper Forums

Club Chopper Forums (http://www.clubchopper.com/forums/)
-   Chopper Builder's Log (http://www.clubchopper.com/forums/chopper-builders-log/)
-   -   Bulletproof (http://www.clubchopper.com/forums/chopper-builders-log/98480-bulletproof.html)

cntrhub 09-30-2012 07:49 PM

Bulletproof
 
http://i149.photobucket.com/albums/s...letwindisc.jpg

The evo gets a new home.

dbshea 10-01-2012 07:14 AM

Are you going to do a full build log? I think tracking your riddle like rants would be interesting and you seem to know your shit. I'd follow it.

Barefoot Choppa 10-01-2012 08:20 AM


:rolleyes:

FRANKTHECRANK 10-01-2012 10:18 AM

Quote:

Originally Posted by dbshea (Post 1199855)
Are you going to do a full build log? I think tracking your riddle like rants would be interesting and you seem to know your shit. I'd follow it.

As long as it comes with sub-titles.

pushrod243 10-01-2012 07:51 PM

looking good......but I expected a much more verbose explanation

cntrhub 10-02-2012 01:28 PM

Yours is next, FTC
 
Quote:

Originally Posted by dbshea (Post 1199855)
Are you going to do a full build log? I think tracking your riddle like rants would be interesting and you seem to know your shit. I'd follow it.

Really? I appreciate that. I figured no one would be interested with the real builders doing the real stuff here. I'm just a parts installer. I let the real metal men do their thing, then show off their hard work.

Quote:

Originally Posted by pushrod243 (Post 1199955)
looking good......but I expected a much more verbose explanation

Thanks... Well, Ear we go then:

http://i149.photobucket.com/albums/s...psdualdisc.jpg

:whacked: Say squid, you are not that street savvy, make sure you watch out for... "Key BOOM!" ... Goes the steel bars. Scrap and rape, screaming how that dutch made springer went from an \ to a C. And if you think I'm going to straighten out a bar that now looks like an S with the wave in the middle of the bend it back?... No thanks said the cowbell. (Rant #1)

:CRY: Here I'm crying the blues; about how cluttered my gear rage is and yip pee, I have a short hobby for a few hours? ;) Waiting for dickhead to bring some parts I can work wit. Pissing seat money down the drain with the handlebar moves at that end too. Waiting for a 3 minute job that is taking months to do. :HMMM: (Rant #2)

:eek: Here comes the demand for hiding the wires&shit like the shovel. Only the shovel stole all the [crashed] evo parts. Now I rape the mule for wires and parts off that bike. Rotate the widow bike back to stock; so as to chase the next fastest bike on the planet. Then, mule [learn] that computer bike all over again, waiting for squidly to begin his 'slab side swinger.' Meanwhile, the shovel starts up with one kick; I've seen him leave the house. I know bullet fires off before you let go of the starter button. So no tuning change has to be made with this puppy. (Rant over)

**) Nice swinger pieces he's collecting. Soon to be thrown on my lap. Oh, now with a mag for an ignition for this one; so no wires are all over the place. BTW, Anyone know the ARD with the 'S' for start and 'R' for run mag type setup?

cntrhub 11-10-2012 09:49 PM

Are we Bored? How about a little entertainment for a few minutes?

Harley Davidson Panhead Roller - YouTube

EVO Chopper - YouTube

pushrod243 11-11-2012 04:46 PM

The panhead video has balls

no wait they both do

cntrhub 11-11-2012 10:03 PM

http://i149.photobucket.com/albums/s...g?t=1352696061

Thanks, Pushrod. Short of a simple gas leak, a short popping up somewhere, she's finished.

scootrrydr 11-13-2012 08:18 PM

Lookin good!

Just checkin it out!

06 pitbull 11-13-2012 08:32 PM

damm half the time my shop looks like that... in the background... I thought I was the only 1 that did that..........:LOL::LOL:

cntrhub 11-13-2012 08:59 PM

Thanks, Scoot.

Pit, If I'm not feeling like a mouse in a maze with all the boxes and crap between 3 bikes, I'd be lost. Ain't it funny how you know were everything is? Just were you left it... Under two feet of pile on. :confused:

06 pitbull 11-13-2012 09:05 PM

Quote:

Originally Posted by cntrhub (Post 1204096)
Thanks, Scoot.

Pit, If I'm not feeling like a mouse in a maze with all the boxes and crap between 3 bikes, I'd be lost. Ain't it funny how you know were everything is? Just were you left it... Under two feet of pile on. :confused:


I here ya..I got 4 bikes 2 table lifts & a row of roll a ways about 18 ft long..no shit.. all in a 20x 25 ft bldg..& boxes of parts & leftovers from other bikes.. take off parts hanging on almost every inch of extra space... :LOL::LOL: I have been tring to clean up..I actually can see the top of my work bench now....

cntrhub 11-27-2012 01:54 PM

Evo Carb Pop Fix - YouTube

The carb popped off so I had to meguyveer something so it wouldn't anymore. This is a driveway shakedown. I think the bike is done.

cntrhub 01-26-2013 10:30 PM

Hey, 06pitbull, I found every part. Just where I left it.

http://i149.photobucket.com/albums/s...g?t=1359263977

http://i149.photobucket.com/albums/s...g?t=1359263828

Hey foggdog, how's you like my 6 over?

1 bad front wheel bearing replaced
2 new fork seals


All times are GMT -7. The time now is 03:03 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubchopper.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners or moderators. clubchopper.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you or have been given the expressed written consent to post. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). For full policy, please click the "CC policy" link. Thank you for visiting the clubchopper.com