Hey guys, As you all know I am now drilling out the holes for my internal wiring and also brake line.
Here is a "Where to Drill Guide" which will help out most 1st time builders like myself. These pics were provided by Greg from Altamont Choppers (Gripos), whom have supplied all of my parts from roller to cables etc, and they ROCK!!
May want to consider having this added as a sticky thread
BRAKE LINE ON LEFT, VOLTAGE REG ON RIGHT
BRAKE LINE EXIT TO BRAKE T
TAILIGHT
VOLTAGE REG EXIT UP TO BATTERY
BACKBONE WIRES TO COIL
BACKBONE WIRES FROM HEADLIGHT AND BARS
WIRES OUT OF BACKBONE
LOWER CENTRE POST, WIRES FROM IGNITION UP INTO BACKBONE AND TO THE COIL
Linear Mode
