View Single Post
  #5 (permalink)  
Old 01-14-2021, 05:34 PM
Dan Lockwood Dan Lockwood is offline
Club Chopper Member
Visit my Photo Gallery
Join Date: Dec 2011
Location: O'Fallon, MO
Posts: 12
Not Ranked     
Okay, I just wired up both mirrors and did the 12v switched power to the right mirror's orange wire along with connecting both blue wires together and both grey wires together. I combined the two blue and the two grey to the 5v DC output of the power supply.

I figured that with this wire configuration that I should at least get all zeros on the speedo LEDS, but nothing lit up. While wired this way, I also tried to send a 12v input to the purple/white left turn signal and should have seen a left turn arrow on the left mirror, but got nothing.

I've confirmed that I still have 5.0v at the supply when all is hooked up.

Any other thoughts?

Thanks, Dan
Reply With Quote